Enhance fertiliser and nutrients usage to improve feed when needed.
Soils underpin the efficiency of plant production on dairy farms. Three aspects of soils are considered when addressing the productivity of soils. These are:
Keeping these three properties in mind when taking action to amend soils will help to maintain a highly productive and efficient system.
The chemical properties of the soil include the nutrient content of the soil. This is both the macro and micro nutrients. Organic carbon and soil pH are also part of the chemical properties of the soil.
Nutrients can be applied to soils in many ways, including via fertiliser and effluent and compost. Nutrients are also added to the system via feed inputs.
Nutrient management has a big impact on farm profits. Dairy Australia works with a range of industry and natural resource management partners to help farmers manage fertiliser application, soil health and effluent.
The Fert$mart planning approach aims to better match nutrient applications to pasture and crop nutrient requirements, allowing dairy farmers to save money on fertilisers without reducing production. Using the Fert$mart approach, nutrient application can better match the right product at the right rate at the right time and in the right place.
Home grown feed is often the cheapest source of feed. However, in order to grow as much feed as possible, it is important to make sure nutrients available in the soil do not limit growth. Soil nutrients need to be in balanced amounts for the growth of the pasture or crop.
There are 17 nutrients which are known to be essential for plant growth. There is also a range of beneficial nutrients and some elements that are required for animal health but have no known value to plants. A deficiency in any one of the 17 essential nutrients will reduce growth and production, even though the others may be abundantly available. Optimum pasture or crop production can only be obtained if all the requirements for plant growth are met.
The macronutrients (nitrogen, phosphorus, potassium, sulphur, calcium and magnesium) are required in relatively large quantities by plants. Plant growth may be stunted if these nutrients are lacking in the soil, become available too slowly, or are not adequately balanced.
Although only required in small amounts, micronutrients (trace elements) are essential for plant growth. It is possible to have toxicities of these nutrients, as well as deficiencies.
Soil fertility can be a complex issue. Below are some key tips and focus areas for soil fertility.
An agronomist or advisor should be able to supply a 4Rs fertiliser plan and a nutrient budget. The 4Rs are:
The nutrient budget will account for the plant nutrients which may be imported onto the farm in feed, as well as identifying other plant nutrients needed to reach pasture growth goals.
Ideally, look for an advisor with Fertcare accreditation.
It is almost impossible to get soil fertility right without up-to-date soil tests. Soil tests check the status of essential plant nutrients and identify other soil related issues which can limit pasture growth, such as pH or soil acidity and alkalinity.
A soil test from each group of paddocks with similar soil types and management history provides the best information. Breaking the farm up into farm management zones (FMZ) based on soil type, management or historical fertiliser application is ideal and will enable fertiliser application to be tailored to the FMZ.
Big savings can be made by customising fertiliser blend types and rates to suit each FMZ, rather than using blanket applications across the farm.
It is important to start by identifying the FMZs on a map, then record the soil test results, previous fertiliser/manure applications, silage/hay making and cropping. This information should be used to target fertiliser requirements to each FMZ.
Soil testing should be done at the same time of the year, or as soon as possible if the results are more than two years old. At least 30 soil cores are required for each sample. Cores should be taken along monitor lines or transects that can be re-sampled in 1–2 years, or collected randomly across the area. Take care to avoid dung and urine patches, areas near gateways, water troughs and stock camps when sampling.
Take the samples to the standard depth (7.5 centimetres in Tasmania, 10cm in all other states). Keep the samples cool and send them to a National Association of Testing Authorities-accredited or Australasian Soil and Plant Analysis Council-certified soil testing laboratory as soon as possible. Soil samples should be sent to the same soil testing laboratory each year to ensure consistency.
The following tips can help dairy farmers to get better results from nitrogen fertilisers.
Calculating how much pasture was consumed on-farm is an important factor when considering the amount of plant nutrients required. Maximising the use of pasture is a cost effective, environmentally responsible and financially viable starting point.
Loss of nutrients to waterways, groundwater or atmosphere where they were not intended is costly to dairy farmers and costly for the environment.
Nutrients are required in the soil to ensure productive plant growth. The purpose of adding nutrients to the soil is to ensure the right nutrients are available in the right quantities at the right time and the right place. When adding these nutrients, regardless of whether they are being supplied by fertilisers, compost, effluent or other inputs, they should always be kept on the land where they were intended.
The Farm Nutrient Loss Index (FNLI) is a decision support tool to assess the risk of nutrient loss from the paddock to the off-farm environment in the format of a user friendly computer program. It is available from asris.csiro.au.
FNLI deals with phosphorous and nitrogen losses to off-site waterways and groundwater, plus losses of nitrogen to the atmosphere.
Soil fertility guidelines are used to interpret your soil test results, and to calculate the fertiliser requirements for a pasture.
The soil fertility guidelines identify if soil nutrient levels are low, adequate or high in relation to the levels required for optimum pasture production.
The optimum soil fertility level for a dairy pasture system is reached when the yield is between 95% and 98% of the maximum potential yield. Beyond this point further application of fertiliser is generally uneconomical.
Numerous trials and research results have been used to calibrate soil test values against yield responses and to produce the soil fertility guidelines for each dairy region.
The below Fert$mart chapters may be helpful:
A number of laboratories throughout Australia offer soil and plant testing services. Many laboratories have membership in the Australasian Soil and Plant Analysis Council (ASPAC), but only a limited number have membership of the National Association of Testing Authorities (NATA).
Using a NATA accredited laboratory, or a laboratory with ASPAC proficiency certificates for the tests required, provides the best assurance of consistent and accurate test results. These laboratories are recommended over those that do not participate in recognised quality assurance programs.